Deployment Package for Version 10.5.1 Firmware. 

Version: 10.5.1
Date : November 21, 2016

IMPORTANT NOTE: Please do not rename the downloadable executable!

Installation Instructions.
================================================================================

Minimum System Requirements

Oscilloscope: DPO5034, DPO5054, DPO5104, DPO5204
 MSO5034, MSO5054, MSO5104, MSO5204,
 DPO5034B, DPO5054B, DPO5104B, DPO5204B,
 MSO5034B, MSO5054B, MSO5104B, MSO5204B,
 DPO7054C, DPO7104C, DPO7254C, DPO7354C,
 DPO70404C, DPO70604C, DPO70804C, 
 DPO71254C, DPO71604C, DPO72004C,
 DPO72504D, DPO73304D,
 DPO72304DX, DPO72504DX, DPO73304DX,
 DSA70404C, DSA70604C, DSA70804C,
 DSA71254C, DSA71604C, DSA72004C,
 DSA72504D, DSA73304D,
 MSO70404C, MSO70604C, MSO70804C, 
 MSO71254C, MSO71604C, MSO72004C,
 MSO72304DX, MSO72504DX, MSO73304DX,
 DPO75902SX, DPO75002SX,
 DPO73304SX, DPO72304SX 

Operating System: Windows 7 Service Pack 1

Hard Disk or Solid State Drive: Approximately 4 GB of available disk space for the recommended installation


================================================================================

1. Installation:

Description: The Deployment Package WEB installer "DeploymentPackage_V10_5_1_24_066141820.exe" is used to install
the Tekscope and several applications on a supported oscilloscope with a single click.
For the list of compatible instruments see the "Supported oscilloscopes" section below:

Steps to download and install the Deployment Package.

i. Download the DeploymentPackage_V10_5_1_24_066141820.exe file from the Tektronix.com Website.
ii. If you have downloaded the WEB installer on a PC, copy the file to the oscilloscope.
iii. Double click on the DeploymentPackage_V10_5_1_24_066141820.exe and follow the installation
wizard to install the application.


==================================================================================
Note: The above installation process will take around 45 minutes and the Oscilloscope
will reboot automatically 2 times in between. On completion of the installation, the
Tekscope will be launched automatically.
The installation of this version will fail unless a previous version of TekScope is
installed on the instrument.

================================================================================
2. Supported Oscilloscopes:
	DPO5034, DPO5054, DPO5104, DPO5204
 MSO5034, MSO5054, MSO5104, MSO5204,
 DPO5034B, DPO5054B, DPO5104B, DPO5204B,
 MSO5034B, MSO5054B, MSO5104B, MSO5204B,
 DPO7054C, DPO7104C, DPO7254C, DPO7354C,
 DPO70404C, DPO70604C, DPO70804C, 
 DPO71254C, DPO71604C, DPO72004C,
 DPO72504D, DPO73304D,
 DPO72304DX, DPO72504DX, DPO73304DX,
 DSA70404C, DSA70604C, DSA70804C,
 DSA71254C, DSA71604C, DSA72004C,
 DSA72504D, DSA73304D,
 MSO70404C, MSO70604C, MSO70804C, 
 MSO71254C, MSO71604C, MSO72004C,
 MSO72304DX, MSO72504DX, MSO73304DX,
 DPO75902SX, DPO75002SX,
 DPO73304SX, DPO72304SX 

================================================================================

If for some reason you are unable to download or install this software,
please contact the Tektronix Technical Support Center:
Customers calling within the U.S. call 1-800-833-92001-800-833-9200 press 3.
Customers calling from outside the U.S. call 503-627-2400503-627-2400.

---End of File---