SignalVu-PC Vector Signal Analysis Software V3.12.0037 PC Requirements --------------- The PC on which SignalVu-PC is installed must meet the following minimum requirements: - Windows Operating System - Windows 7 (64-bit) with Service Pack 1 - Windows 8/8.1 (64-bit) - Windows 10 (64-bit) - 20 GB free space on the C: drive - 4 GB RAM (8 GB RAM for use with RSA306/500/600) - Internet connection for activation of optional applications Note: The RSA7100A requires the CTRL7100A controller. Installing SignalVu-PC ---------------------- SignalVu-PC can be downloaded from the web. It is also available on a USB Flash Drive. 1. If you downloaded SignalVu-PC from the web, extract the archive on the PC where SignalVu-PC will be installed. 2. If you received SignalVu-PC on the USB Flash Drive, insert the Flash Drive into the PC on which the software will be installed. 3. If the SignalVu-PC application is running, close it by choosing the red X in the upper right corner or by selecting File > Exit. 4. Use Windows Explorer to navigate to the folder you extracted from the archive or to the USB Flash Drive. 5. Select the directory containing the 64-bit SignalVu-PC application. 6. Double-click Setup.exe. Follow the on-screen instructions to install the software. The SignalVu-PC product software is made up of the base software and any additionally purchased optional applications (licensed optional software). The base software provides access to the standard SignalVu-PC applications. It is available for download, free of charge, from the Tektronix Web site at www.tektronix.com\downloads. SignalVu-PC optional applications are activated with license files. Free Trial Licenses can be obtained using the Tektronix Asset Management System available at http://www.tek.com/products/product-license. For more information about licensed optional software see the Quick Start manual available in the SignalVu-PC Help menu. Purchasing SignalVu-PC ---------------------- Application licenses may be purchased from Tektronix to activate SignalVu-PC optional applications on your PC. SignalVu optional applications may be ordered as: SVMNL(FL)-SVPC - SignalVu-PC Modulation, General Purpose Digital Modulation Analysis to work with analyzer of acquisition bandwidth ≤ 40 MHz and MDO SVPNL(FL)-SVPC - SignalVu-PC Pulse, Advanced Signal Analysis Software to work with analyzer of acquisition bandwidth ≤ 40 MHz and MDO SVTNL(FL)-SVPC - SignalVu-PC Settling Time Measurements (Frequency and Phase) SVONL(FL)-SVPC - SignalVu-PC OFDM Measurements SVANL(FL)-SVPC - SignalVu-PC AM/FM/PM Audio Signal Analysis SV23NL(FL)-SVPC - SignalVu-PC WLAN 802.11a/b/g/j/p Tx measurements SV24NL(FL)-SVPC - SignalVu-PC WLAN 802.11n Tx measurements, requires SV23 SV25NL(FL)-SVPC - SignalVu-PC WLAN 802.11ac Tx measurements to work with analyzer of acquisition bandwidth ≤ 40 MHz and MDO, requires SV24 CONNL(FL)-SVPC - SignalVu-PC Live Link connection to MDO4000B series oscilloscopes SV26NL(FL)-SVPC - APCO P25 measurement application SV27NL(FL)-SVPC - Bluetooth LE and Bluetooth Basic Rate RF Measurements MAPNL(FL)-SVPC - Mapping and Signal Strength SV56NL(FL)-SVPC - Playback of Recorded Files SV28NL(FL)-SVPC - LTE™ Downlink RF measurements SV54NL(FL)-SVPC - Signal Survey and Classification SV30NL(FL)-SVPC - IEEE 802.11ad SC wideband waveform analysis SV60NL(FL)-SVPC - Cable and antenna measurements (RSA500A/RSA600A), requires Option 04 Tracking Generator B800NL(FL)-SVPC - 800 MHz acquisition bandwidth (RSA7100A) STREAMNL(FL)-SVPC - Streaming data (RSA7100A) SVMHNL(FL)-SVPC - General Purpose Modulation Analysis to work with analyzer of any acquisition bandwidth and MDO (RSA7100A) SVPHNL(FL)-SVPC - Pulse Analysis to work with analyzer of any acquisition bandwidth and MDO (RSA7100A) SV25HNL(FL)-SVPC - SignalVu-PC WLAN 802.11ac Tx measurements to work with analyzer of any acquisition bandwidth and MDO (RSA7100A), requires SV24 TRIGHNL(FL)-SVPC - Advanced triggers (Frequency Mask, Density) to work with RSA7100A SV31NL(FL)-SVPC - Bluetooth 5 measurements, requires SV27 SVQPNL(FL)-SVPC - EMI CISPR detectors Refer to the 'Quick Start' document for complete installation and activation instructions and options. If for some reason you are unable to download or install this update, please contact the Tektronix Technical Support Center: Customers calling within the U.S. call 1-800-833-9200 press 3. Customers calling from outside the U.S. call 503-627-2400. www.tektronix.com/signalvu-pc