Prerequisites - For waveform acquiring, Tektronix DPO70804C, DPO71254C, DPO71604C, DPO72004C, DSA70804C, DSA71254C, DSA71604C, DSA72004C, MSO70804C, MSO71254C, MSO71604C, MSO72004C, DPO73304D, DSA73304D, DPO72504D, DSA72504D, DPO72304DX, DPO72504DX, DPO73304DX, MSO72304DX, MSO72504DX, MSO73304DX, DPO72304SX, DPO73304SX, DPO75002SX, DPO75902SX, DPO77002SX, DPS73308SX, DPS75004SX, DPS75904SX, DPS77004SX. - 16GHz and above suitable for Normative & Informative measurements. (for Gen1 - 5Gbps and Gen2 - 10Gbps) - 12.5GHz and above suitable for Normative & Informative measurements. (Only for Gen1 - 5Gbps) - 8GHz Scope model is suitable for debug only. (Only for Gen1 - 5Gbps) - To Toggle between Compliance Patterns, Using Tektronix AWG: AWG70001A, AWG70002A, AWG7102, AWG7122B, AWG7122C, AWG5014B, AWG5014C, AWG5012C, AWG5002C. AFG: AFG3252, AFG3251, AFG3102, AFG3101, AFG3252C, AFG3251C, AFG3102C, AFG3101C, AFG3051C, AFG3052,AFG3151C, AFG3152C. Oscilloscope: DPO70804C, DPO71254C, DPO71604C, DPO72004C, DSA70804C, DSA71254C, DSA71604C, DSA72004C, MSO70804C, MSO71254C, MSO71604C, MSO72004C, DPO73304D, DSA73304D, DPO72504D, DSA72504D, DPO72304DX, DPO72504DX, DPO73304DX, MSO72304DX, MSO72504DX, MSO73304DX, DPO72304SX, DPO73304SX, DPO75002SX, DPO75902SX, DPO77002SX, DPS73308SX, DPS75004SX, DPS75904SX, DPS77004SX. - To power cycle DUT automatically using Tektronix Power Supply instruments PWS: PWS4205, PWS4305, PWS4323, PWS4602, PWS4721. AWG: AWG7122B, AWG7122C, AWG7102 - Two TCA-SMA or one P7313 SMA differential probe or one P7500 series TriMode™ probe - One SMA breakout fixture - DPOJET Version: 10.0.6 - DPOJET USB Version: v10.2.4 or above - DPOJET USB SSP Version: v10.2.3 or above - SDLA Version: v3.0.2 - TekScope F/W Version: v10.8.1 (Win7, Win10)