Prerequisites:
Please read the Installation notes for model numbers and firmware versions required for this SW.

Platforms supported:
Oscilloscopes: Tektronix DSA8300 with Windows 7
Sampling Module : 80E07/B , 80E08/B, 80E09/B and 80E10/B
Phase Reference Module: 82A04B
Clock recovery unit: CR286A
Extension Module: 80X01

Software:
Scope FW : 6.4.1.0 or above
80SJNB SW Ver 4.0.8.0 or above
Opt ADVTRG : Advanced Trigger with Patten Sync.