HDMI Compliance Test Software(1.4) (DTG Distribution)

Product:  TDSHT3 (DTG Distribution)
Version:  3.5.3
Date   :  Nov-2014

================================================================================

What is in this file:

1. System Requirements
2. Installation
3. Contact Tektronix

================================================================================

1. System Requirements
- The HDMI Compliance Test Software(1.4a) is compatible with the following instruments:

Product      Firmware-Version
==========   ==================
DTG5274      1.0.14
DTG5334      2.0.4

- Disk space requirements:
~6GB of free disk space to install and operate this application.

================================================================================

2. Installing DTG Patterns

The Sink and Cable tests require DTG Patterns on the DTG at -
C:\TekApplications\TDSHT3v1-3 sub-folder.  Install the DTG Pattern
files on the Data Timing Generator (DTG 5274/DTG 5334).

If the DTG Pattern files are not installed on the DTG hard disk,it can be downloaded from the Tektronix website at http://www.tek.com.
Click on "Software" under "Downloads" and use "TDSHT3 HDMI Compliance Test DTG Distribution" in the 'Search by keyword' control.
Once the DTG Pattern installables is downloaded,run TDSHT3_DTG_Patterns_v3.5.3.8.exe to get patterns installed
at - C:\TekApplications\TDSHT3v1-3 sub-folder on the DTG.

================================================================================



3. Contact Tektronix

For any assistance or feedback on the TDSHT3, please send an email to:
- HDMIfeedback@tek.com or
- techsupport@tektronix.com

---End of File---