Release Notes: DataVu-PC

-------------------------------------------------------------
Version 1.1.39                         Date: Sept 8 2017
-------------------------------------------------------------

This release note summarizes new features, improvements and bug fixes contained in the above software release.

The current software for DataVu-PC is available at www.tek.com

Version 1.1.39 contains the following changes:
- Updated to use RSA306 alignment corrections in the latest RSA API.

Known Issues
------------
-DataVu-PC cannot be started while accessing the hosting PC via Windows Remote Desktop.
  Workaround: Start DataVu-PC locally on the hosting PC.
  Workaround: Use another remote service such as VNC.
-The text in LiveVu and LiveVu2 may become distorted or be missing characters when opened. 
  Workaround: Hightlight the text in the text entry fields.
-Time Overview display can crash DataVu-PC when analyzing a file larger than 2TB.
  Workaround: Prior to displaying Time Overview, set the start and stop indexes to encompass less than 2TB.
  Crash occurs at about 2.2TB.  Equivalent time is:
  50MHz - 2.44335908 hours
  200MHz - 36.6503862 minutes
  1000MHz - 9.16259656 minutes


-------------------------------------------------------------
Version 1.1.38                         Date: Sept 1 2017
-------------------------------------------------------------

This release note summarizes new features, improvements and bug fixes contained in the above software release.

The current software for DataVu-PC is available at www.tek.com

Version 1.1.38 contains the following changes:
-2 Channel RSA USB device streaming and recording support (LiveVu and LiveVu2)
    -DPX Streaming up to 40 MHz.
    -Trace Streaming up to the max bandwidth of the supported TEK RSA.
    -Recording up to 40 MHz with external and RF power trigger options.
    -2 Channel Recording if PC hardware supports.
-Frequency Mask Search has been added for the SMARK option.
    -Search through large recorded files. Mask violations will be added as eMarkers.
    -Save and load frequency masks.
-Added support for 32-bit .TIQ Files.
-FFT Length (Resolution Bandwidth) can now be set from the General Spectrum Settings.
-eMarker results are now saved and loaded from a compressed data format.
-Added playback information for the current file displayed at the bottom of the application.
-Fixed several issues with power threshold and pulse search.
-Several bug and stability fixes.

Known Issues
------------
-DataVu-PC cannot be started while accessing the hosting PC via Windows Remote Desktop.
  Workaround: Start DataVu-PC locally on the hosting PC.
  Workaround: Use another remote service such as VNC.
-The text in LiveVu and LiveVu2 may become distorted or be missing characters when opened. 
  Workaround: Hightlight the text in the text entry fields.
-Time Overview display can crash DataVu-PC when analyzing a file larger than 2TB.
  Workaround: Prior to displaying Time Overview, set the start and stop indexes to encompass less than 2TB.
  Crash occurs at about 2.2TB.  Equivalent time is:
  50MHz - 2.44335908 hours
  200MHz - 36.6503862 minutes
  1000MHz - 9.16259656 minutes


-------------------------------------------------------------
Version 1.0.16                         Date: November 29 2016
-------------------------------------------------------------

Version1.0.16 adds the following functions:
- Initial release of DataVu-PC.


Known Issues
------------
- DataVu-PC cannot be started while accessing the hosting PC via Windows Remote Desktop.
 Workaround: Start DataVu-PC locally on the hosting PC.
 Workaround: Use another remote service.
- Time Overview display can crash DataVu-PC when analyzing a file larger than 2TB.
 Workaround: Prior to displaying Time Overview, set the start and stop indexes to encompass less than 2TB.
 Crash occurs at about 2.2TB. Equivalent time is:
 50MHz - 2.44335908 hours
 200MHz - 36.6503862 minutes
 1000MHz - 9.16259656 minutes
- .xdat files recorded using SignalVu-PC 'Record on trigger' and then converted to .tiq using DataVu-PC will not recall in SignalVu-PC.
 Workaround: Prior to export as .tiq, slightly reduce the stop index.
- .r3f files exported to .tiq using DataVu-PC will not recall in SignalVu-PC.
 Workaround: Prior to export as .tiq, slightly reduce the stop index.
- Manually adding an eMarker sets the Start/Stop Power values to 0 dBm if power units are included in the entry.
 Workaround: In the 'Add an eMarker' dialog, delete the units on Start Power prior to selecting 'Add eMarker'.
 Workaround: If entering Stop Power do not enter units.
- .tiq files saved from SignalVu-PC cannot be loaded into DataVu-PC. (DataVu-PC does not currently support 32-bit integer data types.)
- No indication is given when the drive becomes full. For example, when exporting data or saving eMarker data.
- Progress is not always clearly shown when Exporting data.
- Play requires 2 clicks after dragging Stop index.
 Workaround: After dragging Stop index click Play twice.