TekExpress USB RMT (2.0.8)

Product: TekExpress USB RMT (TEKEXP USB-RMT)
Version: 2.0.8
Date : September-2016

Installation Instructions.

================================================================================

Minimum System Requirements

Operating System Windows 7 Service Pack 1.

Hard Disk Approximately 2 GB of available hard-disk space for the recommended installation, which includes
full TekExpress installation and distributed components.

Display Super VGA resolution or higher video adapter (800x600 minimum video resolution for small fonts
or 1024x768 minimum video resolution for large fonts). The application is best viewed at 96 dpi display settings.

Software
Tektronix AWG7102, AWG7122B, AWG7122C
Tektronix DPO/DSA/MSO70804C and above.
Tektronix DSA72504D, DPO72504D, DSA73304D, DPO73304D.
Tektronix DPO72304DX, DPO72504DX, DPO73304DX, MSO72304DX, MSO72504DX, MSO73304DX.
Tektronix Scope Error Detector DPO/DSA70804C, DPO/DSA71254C and above, MSO7080C and above.
Tektronix Scope Error Detector DSA72504D, DPO72504D, DSA73304D, DPO73304D.
Tektronix Scope Error Detector DPO72304DX, DPO72504DX, DPO73304DX, MSO72304DX, MSO72504DX, MSO73304DX.
Ellisys USB3.0 Protocol Analyzer
Two TCA-SMA, plus Optional Two TCA-SMA
One SMA breakout fixture
PWS4000* - Tektronix Power Supply of Output Current 2.5A and above
AWG F/W Version: 3.3 (AWG7102), 4.6 (AWG7122B, AWG7122C)
SerialXpress: 3.3.0.3
DPOJET Version: 6.2.1 (Win7 Scopes) and above
TekScope F/W Version: 7.3.0 (Win7) and above
Tektronix SigTest Package: Ver 2.0.0 (Which supports SigTest 3.2.3)
AWG USB RMT Patterns 2.1.0 (to be installed On supported AWG models as given above)
NI Teststand 4.2.1
NI Labview 2009 (9.0)
DESkey 7.24.0.41
DotNet framework 4.0
TekVisa 3.3.9 or above
Microsoft Excel 2002 or above


FREE TRIALS
---------------------
A software security key may be purchased from Tektronix to permanently enable the software application.

================================================================================

Installation

1 TekExpress USB RMT

i. Download TekExpress_USBRMT_Deployment_Package_v2.0.8.1_066120912.exe

ii. Run the TekExpress_USBRMT_Deployment_Package_v2.0.8.1_066120912.exe program. After the installation completes Select "Restart" to reboot the instrument. The local machine must reboot to complete the installation process.

iii. Once the application in successfully installed, user can remove the TekExpress_USBRMT_Deployment_Package_v2.0.8.1_066120912.exe file from local hard-drive.

iV. TekExpress USB RMT shortcut is created on the desktop. Launch TekExpress USB RMT by double-click on it. Once the application launches go to Help on the Menu tab and select About TekExpress. In About TekExpress click on License info, where the user has to enter the license info. This information is also available in the help document provided with this application under section "How To Activate the License"

2 TekExpress USB RMT Patterns for 'Loopback Automation Initialization' & 'S-Parameter Files' (You need to download this file separately from www.tek.com)

i. On AWG local hard-drive download TekExpress_USB_RMT_AWG_Patterns_v2.1.2.1_066120913.exe for AWG7122B/AWG7122C/AWG7102.

ii. Run the downloaded program, this will extract the patterns on AWG local hard-drive. After the installation completes user can remove the above EXE file from local hard-drive.


================================================================================

If for some reason you are unable to download or install this software
please contact the Tektronix Technical Support Center:
Customers calling within the U.S. call 1-800-833-9200 press 3.
Customers calling from outside the U.S. call 503-627-2400.

---End of File---