----------------------------------------------------- ----------------- INTERNAL USE ONLY ----------------- ----------------------------------------------------- EA POWER CONTROL RELEASE NOTES This document describes the changes between versions of EA Power Control and any known issues. For the latest news on EA Power Control visit the Elektro-Automatik web site at: http://www.elektroautomatik.de Version 2.29 ----------------- - Fix silent installation problem Version 2.28 ----------------- - Terminal shows preset values of 3 channels for BT20K triple device - Support silent installation - Support OEM DELTA Version 2.27 ----------------- - Support BT20000 single/triple devices - Fix firmware update problem for 10K devices - Support channel switching when features are running in Function Generator - In order to run new license DLL, EAPC project is upgraded to .NET Framework 4.8. (Also some license codes are modified) Therefore, in EAPC installer, we install .NET Framework 4.8 runtime driver now. Version 2.26 ----------------- - Support BT20000 single/triple devices - Support multi peak MPPT for EN50530, battery test CC-CV charging/discharging - Support ampere hour counter, connect overload monitoring, temperature monitoring Version 2.25 ----------------- - Support longer testing time for DIN EN 50530. - Fix Windows 11 KE firmware update error. Version 2.24 ----------------- - Use of the EA-Power Control Update feature is not possible under Windows 11. Using it can lead to an abort of the update and, in the worst case, a defective device. Version 2.23 ----------------- - Scripting in general: now supports up to 5 SCPI commands in one line, separated by semicolons - Scripting in Multi Control: option to use the user text of a device in a command line to send that specific command line to one or multiple devices which match the given user text - Graph: now supports switching between "Full" and "Compact" view to reserve more space for the plot area - Logging: maximum line number per logging file defined to be 65000, after that it would create a new file automatically - Sequencing: Fixed an error where sequencing wouldn't work when the interval is set to several hours Version 2.22 ----------------- - Support Semi F47 power derating - Support Controller Speed, Operation Counter - Start/Stop efficiency calculation with button. Also stop when user defined time is reached - Start logging automatically with Function Generator - Save/load system profile as (load/save to USB stick) on the HMI - Implement precise timer for sequencing, logging and script - Settings are restored automatically when application windows are closed and then re-opened - Hide slave device currently in remote control by its master - In Settings tab Limits, add a "Reset all" button which reset all limits to their defaults Version 2.21 ----------------- - Support automotive LV123/124/148 in function generator - Support customized SAS feature - Support HMI 10K internal flash boot loader update - Support new log format for battery test - Do not allow 10K KE downgrade from version V3.XX to V2.XX - Only allow USB stick HMI update for device with USB slot in the front panel Version 2.20 ----------------- - Support calibration license - Support 10K device calibration - Support new device driver V2_0_2_4 - Support 10K device class 75 - Support new language: Spanish - Support different settings for different device in Sequencing/logging - Support PSB 10K device calibration in demo mode - Support single PDF for every language in all versions (only English for APS) - Support power mode for SAS static test - Support debugging feature in calibration (show device debugging information) - Replace 70% with 75% in UP mode, set Uoc/Isc as preset in EN 50350 - Implement "Apply" button in UI, ET and UP mode in EN 50350 - 10K device calibration only works with KE 2.08 or higher - Fix the font size error in Chinese PC - Enhance demo mode Version 2.19 ----------------- - Support software automatic update - Support new language: French - Support EN50530 simulation DAY_UP mode - Support EN50530 cycle for all DAY modes Version 2.18 ----------------- - Fix calibration data erasing error caused by FW update. EAPC does not restore calibration data after FW update. EAPC only saves a calibration data file for backup. - Support calibration data read/write for ELR 10K, ELR 3K, ELM 5K. - Implement some new requests from sales Brian Version 2.17 ----------------- - Support constant power charging/discharging for battery dynamic test - Support PS 2000 T/S device with TFT display - Refresh MPPT curve and point during DIN EN 50530 test Version 2.16 ----------------- - Support device 10k HMI update with USB stick - Support FG EN50530 UP mode with user input percentage - Support energy and efficiency in EN50530 log file by Brian's request - Show total count and current index when uploading/downloading FG EN 50530 day et/ui data Version 2.15 ----------------- - Support calibration feature for PSB 9000 and standard devices - Support Anybus CAN FW update Version 2.14 ----------------- - Implement FW update: KE 13 update, HMI update for STM32 controller with command line, DR update for PSB 10K devices - Implement Settings and Device State 2 for PSB 10K devices - Implement analog Settings pin 9 and 10 for PSB devices - Fix the remote status error when connect type and access mode do not match - Fix the XY/FC table data error with PSB device - Write/Read to/from the second table block when PSB device is with IU sink mode Version 2.13 ----------------- - Implemented Sandia feature in Multi Control - Implement additional battery test features (static charge and dynamic test) in Function Generator & Multi Control Version 2.12 ----------------- - Implemented SAS (Solar Array Simulation) feature in Multi Control - Implemented Sandia feature in Function Generator - Fixed some small bugs Version 2.11 ----------------- - Fixed issue with updates (pop-up regarding registers with 0 value) - Added up/down buttons to numeric input boxes, manual increment/decrement with arrow keys on keyboard also possible - Added analog interface pin 6, 14, 15 configuration in Settings app (available for PSI 9000, ELR 9000, EL 9000 B series from KE 2.23 for pin 6/14 and KE 2.24 for pin 15) - Added negative value input in Multi Control for PSB and PSBE series - Added logging feature to Function Generator app - Fixed a GUI issue with power actual values higher than 99999W - Fixed an issue with the firmware update of Slave model HMIs - Added a warning message for COM port number bigger than 255 - Added a button to reset the Arbitrary generator in Function Generator app - New demo mode added: Show all available features, but grey out locked ones in Main window Version 2.10 ----------------- - General improvements in the Function Generator app - Added PSB support for Function Generator app - Added graph for DIN EN 50530 data (DayUI and DayET) - Added PSB demo mode device - Added MPPT automatization option to Multi Control app - Fixed an issue with the licence management - Added new device driver (V2.0.2.0) - Added support for new series: PSB 9000 Slave, PSB Slave Front USB, PSB 9000 3W, PSBE 9000 - Added firmware version to every app window - Improved "Script" feature in Terminal and Multi Control - Fixed some small bugs Version 2.09 ----------------- - Added "Script" feature to Terminal and Multi Control app - Added PSB device support to Terminal, Settings and SeqLog app - Modified ethernet communication (disable nagle algorithm) - Modified Function Generator PV DIN EN50530, PV table and MPPT tab - Added option to switch from decimal to hexadecimal view of the CAN interface IDs - Fixed some translation and placement issues - Fixed some possible crashes during Demo mode - Fixed some small bugs Version 2.08 ----------------- - Fixed an issue with the KE update on Windows 10 systems Version 2.07 ----------------- - Fixed some bugs - Added new PV EN 50530 function to Multi Control - Added new TFT display support of PS/PSE 9000 devices - Added some devices Version 2.06 ----------------- - Graph und Funktionsgenerator zu Multi-Control hinzugef gt - M glichkeit einer 14 Tage Trial Version hinzugef gt (PopUps k nnen nicht mehr dauerhaft weggeklickt werden, Multi-Control mit nur 5 Ger ten) -> Lizenstool zur Generierung fehlt noch] - Fehler beim Kom. und Performance von Multi Control verbessert - DR Update wird auch bei "No DR found" zugelassen - Bei DR Update werden Nullwerte bei den Tresholds korrigiert und das Update durchgef gt - Teilkomponenten werden beim Update ignoriert, wenn keine passenden Firmwaredateien in der UPD Datei gefunden werden - Neue Ger te Klassenerkennung eingef gt (EL3000B, PS3000C, PSB9000; alle ohne FG-Unterst tzung in EAPC) - Fehlermeldungen w hrend des Updates verbessert (Fehler deutlicher erkennbar) - Fehler bei Seq&Log behoben (Seq. lief, aber Kommunikation zum Ger t war tot) - Bei Funktionsgenerator PV Tabelle MPP Punkt in Grafik eingef gt, PU Kurve und Effizienz eingef gt ((actual power)/(V_MPP I_MPP*100%)) - Bei Funktionsgenerator neue PV DIN EN 50530 Funktion hinzugef gt - Konfiguration der Anybus-Schnittstellenkonfiguration hinzugef gt - Fehler in der Settings App behoben - Kleinere Fehler behoben Version 2.05 ----------------- - Improved communication for Multi Control and SeqLog - Fixed some bugs with SeqLog with different sequence files - Read and write devices settings during KE update - Changed update procedure for HMI with external flash - Fixed some small bugs Version 2.04 ----------------- - Added MPP Tracking to advanced feature Function Generator - Improved DR firmware update to recover calibration data [Only for some devices, definition via UPD firmware file] - Fixed some bugs Version 2.03 ----------------- - Added new help file - Added advanced features Function Generator and Graph - Added DEMO mode - Added some FORMAT settings in the configuration tab - Fixed some bugs Version 2.02 ----------------- - Added new help file - Added logging feature in Multi Control APP - Added multi language support - Fixed some bugs Version 2.01 - First final release ----------------- - Added new help file - Fixed some small bugs