Environment Plug-in Customer Release Notes

Version:	3.0
Last Revised: Oct 16, 2017
Product: Environment Plug-in

Description

Environment plug-in is a plug-in that can be installed on a PC which has SourceXpress application or on AWG 70000 instrument with v5.3 or later. Once installed, this plug-in integrates and operates seamlessly with SourceXpress or AWG 70000 user and programmer interfaces. This plug-in lets you 
* Build a variety of scenarios
* Ability to build up to 50 scenarios
* A large variety of emitters available
* Ability to add up to 100 emitters to a scenario
* Compile both scenario waveforms and sequences
* Control durations of each emitter
* Set emitter power, start time, center frequency/baseband offset
* Import user created interference signals
* Create RF/IF or IQ signal formats

Version 3.0 Release Description

V3.0
Initial Release 

Target Platforms

Environment plug-in runs with SourceXpress on PC or on AWG 70000 instrument. The following operating systems are supported:
* Windows 7 (64-bit)
* Windows 8 (64-bit)
* Windows 10 (64-bit)

Prerequisite

* Microsoft .NET 4.5 runtime framework
* This plug-in will integrate with v5.3 or later of the SourceXpress PC application and v5.3 AWG instrument firmware. Go to http://www.tek.com/signal-generator/awg70000-arbitrary-waveform-generator to download the latest AWG70000 firmware. Go to http://www.tek.com/sourcexpress  to download the latest SourceXpress software.
* TekVISA v4.0.4.2 is only required to communicate with SourceXpress via PI commands; Go to www.tek.com to download the compatible version of TekVISA. 
* In order to compile the waveforms from this plug-in, an Environment license must be purchased and enabled on SourceXpress or AWG 70000 instrument. Trial license can be downloaded or ordered from Tektronix website.
 

Product Upgrades

From time to time Tektronix releases new versions of the product software or optional application software.  Customers can download these from the Tektronix web site at http://www.tek.com/signal-generator/awg70000-arbitrary-waveform-generator under the Software Packages tab and Plug-ins tab.


Contacting Tektronix

One method to receive timely information on new software updates, new products from Tektronix and other useful information is through a MyTek account. To join MyTek, please visit www.tek.com/mytek to become a member.

For application-oriented questions about a Tektronix measurement product, please call Product Support. In North America call 1-800-833-9200 option 3, Monday-Friday, 6:00AM - 5:00PM Pacific Time or contact us by email at techsupport@tektronix.com.

For service support call 1-800-833-9200 option 2, Monday-Friday, 5:00AM-5:00PM Pacific Time or contact us by email at meas-svc-feedback@tektronix.com

Outside of North America: please contact your local Tektronix Sales or Distributor office. Refer to our web site at www.tek.com for listings of those offices.


For all other information call 1-800-833-9200, visit our web site at www.tek.com, or write to us at:

Tektronix, Inc.
P.O. Box 500
Beaverton, OR 97077
USA