Date: Mar, 2016

Product: HSIC Essentials

Version: v10.1.0

Contents of this Readme File:
1. Introduction
1.1 Features
2. HSIC created changes on your system.
3. Before you click "RUN"
4. Known Limitations
4.1 Installer related limitation
4.2 Software related limitation
================================================================================

1. Introduction

The Tektronix HSIC Essentials Option provides Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for HSIC devices

HSIC option installs:
- HSIC Essentials DPOJET Plug-in
- HSIC Decoder

The MOI contains the procedure for installation and the detailed information on how to
use the system. This Readme.txt file contains additional information for the user.

1.1 Features

- Release - v6.0.4
ReadMe and SRM update to check for TekScope v10.3.90 or later and DPOJET v7.3.0. or later

- Release - v6.0.3
Installer update for 'Audit' compatibility

- Release - v6.0.2
Installer update to check for minimum bandwidth of >= 2GHz

- Release - v6.0.1
Installer update to support latest DPOJET Base v6.1.0

- Release - v6.0.0
Initial release of the software that has HSIC Essentials, Decoder and MOI

=================================================================================
2. HSIC created changes on your system
HSIC Essentials, a DPOJET Plug-in
a) HSIC Essentials can be launched from “HSIC Essentials“ menu under “Analyze” menu of Scope application menu
b) Launching HSIC Essentials option from Analyze menu of TekScope will launch DPOJET application with “HSIC” selected under Standards tab.
c) HSIC measurements on DPOJET do not have dedicated free trials.

HSIC Decoder
a) HSIC Decoder can be launched by clicking on the Vertical menu -> Bus Setup. Choose Serial option and Custom from the drop down. HSIC will be shown in another drop down.
=================================================================================
3. Before you click "RUN"

a) Ensure that all the required instruments are properly warmed up, Signal Path
Compensation (SPC) is performed, followed by calibration and cable Deskew.
b) It is highly recommended to read HSIC MOI before you click "RUN
c) Ensure that the following softwares are installed in your system.
Tekscope (v10.3.90 onwards on Win 7 scope)
Tektronix Jitter and Eye Diagram tool (Version 7.3.0 onwards on Win 7 scope)
d)HSIC Essentials is supported only on 64 bit Win7 Oscilloscopes
=================================================================================
4. Known Limitations

4.1 Installer related limitation
a) Required software’s are installed on C:\ only.
b) User needs to have administrative privilege while installing the application

4.2 Software related limitation
a) HSIC decoder does not have PI support and Trigger capability
b) HSIC decoder does not decode the Connect bus state

=================================================================================