Installation Instructions for Tkdpo2k3k4k IVI Driver v1.5

Tektronix Tkdpo2k3k4k IVI Driver for DPO/MSO 2000,3000 and 4000 and MDO3000, 4000 and 4000B and MDO3 Series Oscilloscopes.

Installation Instructions

The installation of the IVI driver will not complete until the IVI
Foundation Shared Components are installed. This download includes the
version of the shared components that the driver was developed with.
Newer versions of the shared components will work with this driver.
Older versions won't. This distribution includes the shared components
clean-up utility that should be used whenever removing and replacing
these components. Running "CleanupUtility.exe" when shared components
are not installed will simply result in an information message. Click
through this and then install the shared components. After installing
the Shared Components, you can install the IVI driver.

1. Save the downloaded .exe file to your PC hard drive.
Make note of the location that the file is saved to. Launch the self
extracting executable file. You will be prompted to select a destination
folder (or you can accept the default: C:\Documents and Settings\Administrator\Local Settings\Temp).
Following extraction, the selected location will have an "Tkdpo2k3k4kIVIDriver1.5" folder.
This folder will contain two folders: "x86" which has installers that run on 32-Bit OS and "x64" which
has installers that run on 64-Bit OS. Each of these will contain two folders: one folder is named "IVI Driver"
and the other is named "Shared Components".

2. Close the programs running on your  PC.

3. Uninstall any previously installed version of Shared Components on the PC.
To uninstall the Shared Components run the utility "IviCleanupUtility.exe" in the
"Shared Components" directory.  Double click on this .exe file to uninstall a currently
installed version of the shared components. If there are no shared
components installed you will be notified with a message box. Simply
dismiss the message box and continue with the SharedComponents installation.

5. To install the IVI Foundation Shared Components run the program named
IviSharedComponents.exe which is located in the "Shared Components" directory.

4. After the Shared Components are installed, double-click the .msi file in the
"IVI Driver" directory to install the Tektronix Tkdpo2k3k4k IVI Driver.

NOTE: If you have successfully downloaded this software but are unable to
complete the installation per the instructions above, please contact the
Tektronix Technical Support Center. Customers calling within the U.S.
call 1-800-833-9200 (customers calling 9:43 AM from outside the U.S.
call 503-627-2400).