TekExpress® SAS Transmitter Automated Solution

Product: TekExpress® SAS Transmitter Automated Solution
Version: 10.2.2


Installation Instructions.

================================================================================

Minimum System Requirements

Oscilloscope : Tektronix MSO/DPO/DSA70000 C/D/DX/SX series Oscilloscope >= 12.5GHz or above Bandwidth for Gen1 and Gen2 speeds.
Gen3 requires 20GHz or above.

Operating System : Windows 7 .

Hard Disk : Approximately 5 GB of available hard-disk space for the recommended installation, which includes full TekExpress installation and distributed components.

Software
> Tektronix Jitter and Eye Diagram Analysis Tool (DPOJET) Ver 10.0.0 and above(64 bit - Win7)
> Microsoft .net 4.0 Framework
> Microsoft Internet Explorer 6.0 SP1 or later.
> Microsoft Photo Editor 3.0 or equivalent software for image files viewing.
> Matlab Runtime Engine Ver 8.0 (Windows 7)
> IronPython 2.7.3
> PyVisa Ver 1.0.0.25
> Needed options
a. SAS3-TSG for SAS-3 Automated Tx Compliance Tests.
b. SAS3-TSGW for SAS-3 WDP Transmitter Measurements.

FREE TRIALS
---------------------
This software download offers 10 free trails by default for SAS3-TSG and SAS3-TSGW option. A software license key may be purchased from Tektronix to permanently enable the software application.
SAS3-TSG (TekExpress® SAS Transmitter Automated Solution) is pre-requisite for enabling SAS3-TSGW option

=============================================================================

Installation

1 TekExpress® SAS Transmitter Automated Solution

i. Download self-extracting SAS-TX web installer TekExress_SAS_V10.2.2.5_066156304.exe
ii. Close & exit Tekscope or any other running application.
iii. Run the TekExress_SAS_V10.2.2.5_066156304.exe program which will unzip and follow the installation wizard to install the application. After the installation completes Select "Restart" to reboot the instrument.
iv. After restart of the oscilloscope, Go to Analyze menu to launch TekExpress® SAS Transmitter Automated Solution.

=============================================================================

If for some reason you are unable to download or install this software
please contact the Tektronix Technical Support Center:
Customers calling within the U.S. call 1-800-833-9200 press 3.
Customers calling from outside the U.S. call 503-627-2400.