Product: Tektronix Report Generator Software for Optional Applications
Version: 3.3.3.1
Date : 26th Jul, 2011


================================================================================

What is in this Readme File?

1. System Requirements
2. Features
3. Known Problems / Issues
4. Installation
5. Starting the Application
6. Contents of Distribution
7. Uninstallation
8. Contacting Tektronix


================================================================================================

1. System Requirements

- A DPO7000 series Oscilloscope with Firmware version 3.0.0 or above
- A DPO/DSA 70000 series Oscilloscope with Firmware version 3.0.0 or above
- A TDS5000B series Oscilloscope Firmware version 2.0.0 or above
- A TDS6000B Series Oscilloscope Firmware version 5.1.2 or above
- A TDS6000C Series Oscilloscope Firmware version 5.1.5 or above
- A TDS7000 / CSA7000 / TDS6000 series Oscilloscope with Firmware version 2.5.3 or
above

- TekScope IVI driver(3.0) and IVI Shared Components Version 2.0.1

- TekVISA 2.0.11 or above

- TekScope : Tek Scope latest Firmware updates can be downloaded from the Tektronix
website at http://www.tek.com/Measurement/scopes/index.html. Click on
"Software & Drivers" under the "Resources" set of links on the left.

- Minimum amount of disk space required for the application: 15MB



================================================================================================

2. Features

i. Report generator adds Report Generation capabilities like Template creation,
Layout creation and generation of Reports using the Template or Layout specified
to optional applications DPOPWR, TDSET3, TDSRT-Eye, TDSPWR3 and TDSHT3

ii. You can access the online help or the PDF of the online help without starting the
application:
Start->Programs->TekApplications->->Report Generator Help



================================================================================================

3. Known Problems / Issues

i. When an RTF file(Report exported and saved to rtf format) is opened In Windows office XP
or Office 2003 there might be issues in the format like the alignment or image size
differences. This is a known issue and work is ongoing to fix this issue.



================================================================================================

4. Installation

i. If the keyboard is not installed, connect it to the oscilloscope rear panel
(the optional-accessory keyboard plugs into the USB connector).

ii. Power on the oscilloscope to start Windows.

iii. Install the optional applications software CD in the CD-ROM reader
of the oscilloscope.

iv. The autorun utility will start the installation program. If the autorun
utility doesn't start up automatically, browse to the CDROM and double-click
the launch.exe.

v. Select the option 'Install Products'.

vi. Select the option 'Report Generator'.

vii. Select the option 'Install Now'.

viii. Follow the instructions given by the InstallShield Wizard.

After the installation is complete. The Report Generator Software is ready for use.


NOTE : If an older version of Report Generator is present on the Oscilloscope than this version,
the Report Generator will upgrade to a new version.

Recommended : i) It is recommended that the Report Generator v3.0.0 or above is to be used with
Optional Applications 3.0.0 or above to ensure a smooth functioning of the
application.

ii) It is recommended to Restart the Oscilloscope before using the Report Generator
with Applications



================================================================================================

5. Starting the Application

Report Generator is a utility for generating reports in Optional applications.
It can be launched from the application's menu after launching the
application.



================================================================================================

6. Contents of Distribution

Contents of Distribution are listed in C:\Program Files\TekApplications\ReportGenerator



================================================================================================

7. UnInstallation

i.Select Start->Settings->Control Panel from Windows.

ii.Select "Add/Remove programs".

iii.Select "Report Generator" from the list of installed softwares and
click only on the "Add/Remove" button.

iv.Follow the instructions given by the InstallShield Wizard.



================================================================================================

8. Contacting Tektronix

Product Support - For application-oriented questions about a Tektronix measurement
product, call toll free in North America: 1-800-833-9200 option 1, 6:00AM - 5:30PM
Pacific Time or contact us by email at [email protected] For product support outside
of North America, contact your local Tektronix sales office or distributor.

Technical Support - In North America, call 1-800-833-9200 option 3, Monday-Friday, by email at
[email protected] 6:00AM-5:00PM Pacific Time or contact us

Service Support - In North America, call 1-800-833-9200 option 2, Monday-Friday,
5:00AM-5:00PM Pacific Time or contact us by email at [email protected]


Visit us on the web at http://www.tektronix.com/

---End of File---