Radar Software Plug-in installation instructions Installation Instructions: 1) Download the "RadarSetup.exe" file and save it to a temporary location on your PC or AWG instrument. 2) If you are installing this plug-in on PC, please make sure SourceXpress application version 6.1 or above is installed. You can download the latest SourceXpress application from http://www.tek.com/sourcexpress. 3) If you are installing this plug-in on AWG, please make sure the AWG firmware version is 6.1 or above. You can download the latest AWG software from http://www.tek.com/signal-generator/awg70000-arbitrary-waveform-generator. 4) Run "RadarSetup.exe" file by double-clicking and follow its instructions and prompts. 5) When the installation has completed, you may safely delete the download file. Contacting Tektronix: One method to receive timely information on new software updates, new products from Tektronix and other useful information is through a MyTek account. To join MyTek, please visit www.tektronix.com/mytek to become a member. For application-oriented questions about a Tektronix measurement products, please call Product Support. In North America call 1-800-833-9200 option 3, Monday-Friday, 6:00AM - 5:00PM Pacific Time or contact us by email at techsupport@tektronix.com. For service support call 1-800-833-9200 option 2, Monday-Friday, 5:00AM-5:00PM Pacific Time or contact us by email at meas-svc-feedback@tektronix.com Outside of North America: please contact your local Tektronix Sales or Distributor office. Refer to our web site at www.tek.com for listings of those offices. For all other information call 1-800-833-9200, visit our web site at www.tek.com, or write to us at: Tektronix, Inc. P.O. Box 500 Beaverton, OR 97077 USA