This software release is for for TDS/CSA8000, TDS/CSA8000B, TDS/CSA8200, and DSA8200 instruments running Windows XP Operating System. INSTALLATION INSTRUCTIONS 1. Click on the link to download the executable. If you are connecting to the Internet directly from your 8000 Series instrument, select the Run option. This will download and unpack the installation files on your instrument. Follow the instructions to start the installation and then skip to step 4. If you are using a PC, select the Save option. This will save the compressed file to a location on your computer. 2. If you are installing a new version of the application on your instrument you will need to transfer the compressed file to your 8000 Series instrument into a temporary directory. 3. Double click the downloaded file. Click the Setup button to start the Winzip extractor to unpack the files to your instrument or workstation and start the installation program. 4. Begin the installation of the TekScope Software by clicking on the Install Software option at left, then the Tektronix 8000 Series Oscilloscope Application and TekVISA Analysis and Connectivity Software link at right. 5. Once the installation has completed, reboot the instrument. NOTE: We strongly recommend using autorun.exe program for installing your software. This will ensure proper installation of all required software components. Congratulations, you have upgraded your instrument to the most current version! If you have any problems, please contact the Tektronix Technical Support Center at: Customers calling within the U.S. please call 1-800-833-9200 press 3. Customers calling from outside the U.S. please call 503-627-2400. www.tektronix.com/oscilloscope