Prerequisites
-------------
- Oscilloscopes:
- DPO/DSA/MSO70604C (Gen1 testing only)
- DPO/DSA/MSO70804C (Gen1 and Gen2 testing only)
- DPO/DSA/MSO71254C (Gen1 and Gen2 testing only)
- DPO/DSA/MSO71604C (Gen1, Gen2, and Gen3 testing)
- DPO/DSA/MSO72004C (Gen1, Gen2, and Gen3 testing)
- DPO/DSA72504D (Gen1, Gen2, Gen3 and Gen4 testing)
- DPO/DSA73304D (Gen1, Gen2, Gen3 and Gen4 testing)
- DPO/MSO72304DX (Gen1, Gen2 and Gen3 testing)
- DPO/MSO72504DX (Gen1, Gen2, Gen3 and Gen4 testing)
- DPO/MSO73304DX (Gen1, Gen2, Gen3 and Gen4 testing)
- DPO72304SX (Gen1, Gen2 and Gen3 testing)
- DPO73304SX (Gen1, Gen2, Gen3 and Gen4 testing)
- DPO75002SX* (Gen1, Gen2, Gen3 and Gen4 testing)
- DPO75902SX* (Gen1, Gen2, Gen3 and Gen4 testing)
- DPO77002SX* (Gen1, Gen2, Gen3 and Gen4 testing)
- DPS75004SX* (Gen1, Gen2, Gen3 and Gen4 testing)
- DPS75904SX* (Gen1, Gen2, Gen3 and Gen4 testing)
- DPS77004SX* (Gen1, Gen2, Gen3 and Gen4 testing)
*Non-ATI channels are only supported by TekExpress PCI Express.

- AFG31252, AFG3252, and AFG3252C for Automated DUT Control.

- AWG7102, AWG7122B, AWG7122C, AWG5014C, AWG5014B, AWG5002B, AWG5002C, AWG7082C, AWG70001A, AWG70002A for Automated DUT Control.

- GRL PCIE34 PHY Test Controller with part number : GRL-PCIE34-P1 for Automated DUT Control.
	- Contact GRL at support@graniteriverlabs.com for support and quote@graniteriverlabs.com to request for a quote.
- GRL PCIE34 PHY Test Controller with part number : GRL-PCIE34-P1 for Power Cycle the DUT (Add-In-Card)
	- Contact GRL at support@graniteriverlabs.com for support and quote@graniteriverlabs.com to request for a quote.

- Keithley System S46T RF Microwave Switch Systems for x12 PCIe .
- Gigatronics RF Switch 26GHz (8902-L-48TS26) for x16 PCIe .

- TekScope Firmware v10.8 (Win7) and v10.9 or above (Win10)
- DPOJET 10.0.7 (Win7) and v10.0.8 or above (Win10)
- DPOJET PCIE: Ver. 10.4.3

- SigTest v3.2.0.1 for Gen1, Gen2 and Gen3 for CEM, U.2, M.2 Specs.
- SigTest v4.0.42 for Gen3 Base and for Gen4 Base / CEM: Add-In-Card.
- SigTest v4.0.46 for Gen4 CEM: System-Board.