1.Tektronix Dependency Firmware/Applications Version (These needs to be
    installed by the End-user explictly):

    1. RealTime TekScope firmware       Ver. 1.26.0 and above
       

2.Scope and Probe Requirements
    1. Scopes Supported	: MSO64 , MSO64B , MSO66B, MSO68B with bandwidth (2.5 GHz and above with 6-WIN)
             Note: Minimum recommended bandwidth on MSO6/MSO6B is 4 GHz. However, the application installs on MSO6/MSO6B with bandwidth 2.5GHz
    2. Probes
	Four quantity TDP77xx Series Tri-mode probe with P77STFLXA solder in tip with TekFlex connector 
    3. Termination board : UNH-IOL MIPI D-PHY REFERENCE TERMINATION BOARD(RTB)


3.Tektronix Software option keys required :
    1. On TekScope :
       a. Option keys: CMDPHY21-Enables both DPHY12 and DPHY21
		       CMDPHY-Enables only DPHY12
		       6-DJA -optional for DPHY12 and Mandatory for DPHY21
	Note : Test ID 1.5.4 Eye diagram display required DJA. In the absence of DJA, gives the measured value alone.