Prerequisites

Please read the Installation notes for model numbers and firmware versions required for this SW. 

Platforms supported:
Oscilloscopes: Tektronix DSA8300 with Windows 7
Sampling Module : 80E09/B , 80E10/B and 80E11/B
Phase Reference Module: 82A04B
Clock recovery unit: CR286A
Extension Module: 80X01

Software:
Scope FW Ver: 6.6.1.1 or above
80SJNB SW Ver: 4.3.2.0 or above
Opt JNB01: 80SJNB Advanced.
Opt ADVTRG: Advanced Trigger with Patten Sync.