README.TXT for Toggle Patterns of TekExpress PCI Express to deployed in supported AWGs.

Product:  PCIE TX Toggle Patterns v10.0.0.2
Version:  10.0.0.2
Date:  Sep 2018

PCIE TX Toggle Patterns -  When AWG is selected for 'Automated DUT control', this AWG file will help to toggle between various patterns. 
In case of AWG-70000A series, it can be simultaneously or separately setup as an external clock source, with or without SSC.

TekExpress Automation software can control the DUT using a Tektronix AFG or AWG and cycle it through the various speeds, deemphasis and Presets that are necessary for the compliance test. 
This eliminates the error prone push button approach that is normally used for DUT control.

Supported AWGs (for Automated DUT Control)
---------------------------------------------------------------------
AWG7102, AWG7122B, AWG7122C, AWG5014C, AWG5014B, AWG5002B, AWG5002C, AWG7082C, AWG70001A, AWG70002A

Supported AWG (for BASE Specification (Device) and SRIS-Tx-Test-Board as DUT Type (Suite) to be setup as an external clock source)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AWG70001A

Supported AWG (for BASE Specification (Device) and SRIS-Tx-Test-Board as DUT Type (Suite) to be setup as an external clock source and 'Automated DUT Control')
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
AWG70002A

Installation:
-------------
i.   From www.tek.com download/copy the "PCIE_TX_Toggle_Patterns_v10.0.0.2.exe" to any AWG supported (as per list in this Release Notes)
ii. Close & exit AWG application.
iii.  Run the PCIE_TX_Toggle_Patterns_v10.0.0.2.exe and follow the installation wizard to install the toggle pattern

Deployment:
--------------------
After installation, you will find a folder C:\PCIE_Patterns and the following *.AWG files in it
1. PCIE_Toggle_Sequence.awg
	Used for all Specification (Device) and DUT Type (Suite) (Except BASE Specification (Device) and SRIS-Tx-Test-Board as DUT Type (Suite)) on 
	AWG7102, AWG7122B, AWG7122C, AWG5014C, AWG5014B, AWG5002B, AWG5002C, AWG7082C
2. PCIE_Toggle_Sequence.awgx
	Used for all Specification (Device) and DUT Type (Suite) (Except BASE Specification (Device) and SRIS-Tx-Test-Board as DUT Type (Suite)) on 
	AWG70001A, AWG70002A
3. PCIE_SRIS_Clock_With_SSC.awgx
	Used for BASE Specification (Device) and SRIS-Tx-Test-Board as DUT Type (Suite) on 
	AWG70001A that is used as an external clock source with SSC. SRIS Configuration for SSC can be set using 'Awg Clock Setup' in Configuration
4. PCIE_SRIS_Clock_Without_SSC.awgx
	Used for BASE Specification (Device) and SRIS-Tx-Test-Board as DUT Type (Suite) on 
	AWG70001A that is used as an external clock source without SSC. SRIS Configuration for SSC can be set using 'Awg Clock Setup' in Configuration
5. PCIE_Toggle-Sequence_SRIS_With SSC.awgx
	Used for BASE Specification (Device) and SRIS-Tx-Test-Board as DUT Type (Suite) on 
	AWG70002A, CH1 is used as an external clock source with SSC and CH2 is used for 'Automated DUT Control'. SRIS Configuration for SSC can be set using 'Awg Clock Setup' in Configuration
6. PCIE_Toggle_Sequence_SRIS.awgx
	Used for BASE Specification (Device) and SRIS-Tx-Test-Board as DUT Type (Suite) on 
	AWG70002A, CH1 is used as an external clock source without SSC and CH2 is used for 'Automated DUT Control'. SRIS Configuration for SSC can be set using 'Awg Clock Setup' in Configuration