Date: Sept, 2016

Product: MPHY Essentials

Version: v10.0.0

Contents of this Readme File:
1. Introduction
2. MPHY Essentials created changes on your system.
3. Before you click "RUN"
4. Recommendations
5. Known Limitations
5.1 Installer related limitation

================================================================================

1. Introduction

The Tektronix MPHY Essentials Option provides Design and Validation Engineers an Easy and Fast Way to Debug and Perform Compliance Testing for MPHY devices

MPHY option installs:
- MPHY Essentials DPOJET Plug-in


The MOI contains the procedure for installation and the detailed information on how to
use the system. This Readme.txt file contains additional information for the user.
=================================================================================
2. MPHY created changes on your system
MPHY Essentials, a DPOJET Plug-in
a) MPHY Essentials can be launched from MPHY Essentials menu under Analyze menu of Scope application menu
b) Launching MPHY Essentials option from Analyze menu of TekScope will launch DPOJET application with "MPHY" selected under Standards tab.
c) MPHY measurements on DPOJET do not have dedicated free trials. But, 10 free trials of DPOJET analysis tool can be used to trial MPHY Essentials measurement upto 10 trials.

=================================================================================
3. Before you click "RUN"

a) Ensure that all the required instruments are properly warmed up, Signal Path
Compensation (SPC) is performed, followed by calibration and cable Deskew.
b) It is highly recommended to read MPHY MOI before you click "RUN
c) Ensure that the following softwares are installed in your system.
Tekscope (v10.3.0 onwards on Win 7 scope)
DPOJET (v10.0.0 onwards on Win 7 scope and v5.0.0 onwards on WinXP scope)
d)MPHY Essentials is supported only on 64 bit Win7 Oscilloscopes

=================================================================================
4. Recommendations

Following recommendation to avoid any issues while running the tests


=================================================================================
5. Known Limitations

5.1 Installer related limitation
a) Required softwares are installed on C:\ only.
b) User needs to have administrative privilege while installing the application
c) If DPOJET software is upgraded and/or for some reason the DPOJET software is uninstalled and then installed again, please re-install MPHY software.

5.2 Application related limitation
a) Schematic with Tek Fixture is not available in the MOI

=================================================================================