TekExpress PCI Express Compliance solution (v10.6.1) Product: PCE3, PCE4, PCE5 and SWX-PCE Installation Instructions. ================================================================================ Minimum System Requirements Oscilloscopes: - DPO/DSA/MSO70604C (Gen1 testing only) - DPO/DSA/MSO70804C (Gen1 and Gen2 testing only) - DPO/DSA/MSO71254C (Gen1 and Gen2 testing only) - DPO/DSA/MSO71604C (Gen1, Gen2, and Gen3 testing) - DPO/DSA/MSO72004C (Gen1, Gen2, and Gen3 testing) - DPO/DSA72504D (Gen1, Gen2, Gen3 and Gen4 testing) - DPO/DSA73304D (Gen1, Gen2, Gen3 and Gen4 testing) - DPO/MSO72304DX (Gen1, Gen2 and Gen3 testing) - DPO/MSO72504DX (Gen1, Gen2, Gen3, and Gen4 testing) - DPO/MSO73304DX (Gen1, Gen2, Gen3, Gen4 and Gen5 testing) - DPO71304SX (Gen1, Gen2 and Gen3 testing) - DPO71604SX (Gen1, Gen2 and Gen3 testing) - DPO72304SX (Gen1, Gen2 and Gen3 testing) - DPO73304SX (Gen1, Gen2, Gen3, Gen4 and Gen5 testing) - DPO75002SX (Gen1, Gen2, Gen3, Gen4 and Gen5 testing) - DPO75902SX (Gen1, Gen2, Gen3, Gen4 and Gen5 testing) - DPO77002SX (Gen1, Gen2, Gen3, Gen4 and Gen5 testing) - DPS75004SX (Gen1, Gen2, Gen3, Gen4 and Gen5 testing) - DPS75904SX (Gen1, Gen2, Gen3, Gen4 and Gen5 testing) - DPS77004SX (Gen1, Gen2, Gen3, Gen4 and Gen5 testing) Operating System: Windows 10 Hard Disk: Approximately 2.2 GB of available hard-disk space for the recommended installation, which includes full TekExpress installation and distributed components. Display: Super VGA resolution or higher video adapter (800x600 minimum video resolution for small fonts or 1024x768 minimum video resolution for large fonts). The application is best viewed at 96 dpi display settings. Software: • TekScope Firmware v10.12 or above • DPOJET v10.3.0 or above • Microsoft Internet Explorer 7.0 or later. • Adobe Reader 6.0 or equivalent software for viewing portable document format (PDF) files. • Microsoft Photo Editor 3.0 or equivalent software for image files viewing. ================================================================================ Installation 1. TekExpress PCI Express i. Download deployment package of TekExpress PCI Express "TekExpress_PCI_Express_V10.6.1.79.exe" on the Scope ii. Close & exit TekScope or any other running application. iii. Run the TekExpress_PCI_Express_V10.6.1.79.exe program and follow the installation wizard to install the application. After the installation completes Select "Restart" to reboot the instrument. iv. After restart of the oscilloscope, Go to Analyze menu to launch TekExpress PCI Express application solution. 2. PCIE AWG Pattern - When AWG is selected for 'Automated DUT control', this AWG file will help to toggle between various patterns. i. From www.tek.com download the "PCIE_TX_Toggle_Patterns_v10.0.0.2.exe" to any AWG supported (as listed in the Release Notes of TekExpress PCI Express) ii. Copy the PCIE_TX_Toggle_Patterns_v10.0.0.2.exe to any AWG supported (as listed in the Release Notes of TekExpress PCI Express) iii. Close & exit AWG application. iv. Run the PCIE_TX_Toggle_Patterns_v10.0.0.2.exe and follow the installation wizard to install the toggle pattern ================================================================================ If for some reason you are unable to download or install this software Please contact the Tektronix Technical Support Center: Customers calling within the U.S. call 1-800-833-9200 press 3. Customers calling from outside the U.S. call 503-627-2400.