Automated TekExpress USB3.1 Tx Measurements(10.3.0)
Product: USB-TX and USBSSP-TX
Version: 10.3.0
Date : July, 2017
Installation Instructions.
================================================================================
Minimum System Requirements
Oscilloscopes:
DPO/DSA/MSO70000C/D/DX/SX Series Digital Oscilloscopes (12.5GHz and above for Gen1 - 5Gbps; 16GHz and above for Gen2 - 10Gbps)
Operating System:
Windows 7 with Service Pack 1.
Hard Disk:
Approximately 5GB of available hard-disk space for the recommended installation, which includes
full TekExpress installation and distributed components.
Display:
Super VGA resolution or higher video adapter (800x600 minimum video resolution for small fonts
or 1024x768 minimum video resolution for large fonts). The application is best viewed at 96 dpi display settings.
Software
• TekScope 10.3.3
• DPOJET 10.0.0
• SDLA 3.0.0.2
• Microsoft Internet Explorer 7.0 or later.
• Adobe Reader 6.0 or equivalent software for viewing portable document format (PDF) files.
FREE TRIALS
---------------------
No Free Trails avialable for 'TekExpress USB3.1 Tx' application.
================================================================================
Installation
1 TekExpress USB
i. Download deployment package of TekExpress USB3.1 Tx "TekExpress_USB3Tx_Wrapper_v10.3.0.6_066155415.exe" on the oscilloscope
ii. Close & exit TekScope or any other running application.
iii. Run the "TekExpress_USB3Tx_Wrapper_v10.3.0.6_066155415.exe" program and follow the installation wizard to install the application. After the installation is complete select "Restart" to reboot the instrument.
iv. After restart of the oscilloscope, Go to Analyze menu to launch TekExpress USB3.1 Tx application solution.
2 TekExpress USBTx AWG Pattern to help toggle between compliance patterns automatically when using an AWG7K.
i. On AWG local hard-drive download ""TekExpress_USB3Tx_Wrapper_v10.3.0.6_066155415.exe" (OR USB3_TX_AWG_7K_70K_Pattern_v4.0.0.1.exe seperately from www.tek.com) for AWG7122B / AWG7122C / AWG7102 / AWG70001A / AWG70002A.
ii. Run the downloaded program, this will extract the patterns on AWG local hard-drive. After the installation completes user can remove the above EXE file from local hard-drive.
3 TekExpress USBTx AWG Pattern to help toggle compliance patterns automatically when using an AWG5K.
i. On AWG local hard-drive download USB3_TX_ AWG_5K_Pattern_v5.0.0.1.exe seperately from www.tek.com for AWG5014B / AWG5014C / AWG5002C / AWG5012C.
ii. Run the downloaded program, this will extract the patterns on AWG local hard-drive. After the installation completes user can remove the above EXE file from local hard-drive.
================================================================================
If for some reason you are unable to download or install this software
please contact the Tektronix Technical Support Center:
Customers calling within the U.S. call 1-800-833-9200 press 3.
Customers calling from outside the U.S. call 503-627-2400.
---End of File---