Date: Feb 2021 README.TXT for TekExpress Automotive Ethernet Solution Software: v10.5.1 Win 7 64 bit / Win 10 64 bit Contents of this Readme File: 1. Introduction 2. Before you click "RUN" 3. TekExpress Automotive Ethernet Application related changes in your system 4. Supported Tests for IEEE Std.802.3bw,IEEE Std 802.3bp™-2016 and IEEE Std 802.3ch™-2020 Transmitter Electrical Specifications for 100BASE-T1 , 1000BASE-T1 & MultiGBASE-T1 5. What's new in this release? 6. Supported list of equipment and accessories 7. Known Limitations 7.1 TekExpress Automotive Ethernet application related limitations 7.2 TekExpress Automotive Ethernet application known issues 8. Installer Related Instructions 9. Software Licenses 10. Contacting Tektronix ================================================================================================= 1. Introduction The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100BASE-T1 (IEEE Std.802.3bw) , 1000BASE-T1 (IEEE Std 802.3bp™-2016) and MultiGBASE-T1 (IEEE Std 802.3ch™-2020)standard for Transmitter electrical specifications tests. Details are available in the Online Help. The compliance software allows for complete or selective testing of any of the transmitter electrical specifications including complete Oscilloscope control of the required setups. Software setup flexibility allows for design validation, margin analysis and repeatable compliance testing while reducing instrument setup difficulties. Additionally, the software can generate a comprehensive date-stamped test report with pass/fail results including Oscilloscope display waveforms and data plots. ================================================================================================= 2. Before you click "RUN" a) Ensure that all the required instruments are properly warmed up, Signal Path Compensation (SPC) is performed, followed by calibration and cable deskew. b) Steps for network drive connection b.1) Background information: After you first launch TekExpress, it creates the following folders on your Computer: "..\My Documents\My TekExpress\" ***NOTE. Ensure that the "My TekExpress" folder has full Read and Write access. ***NOTE. If a user with a different Windows login ID launches TekExpress, a new folder is created under "My documents" of new user. "..\Documents\My TekExpress\Automotive Ethernet\" "..\Documents\My TekExpress\Automotive Ethernet\Untitled Session\", This sub-folder is created every time the "TekExpress Automotive Ethernet.exe" is launched and this sub-folder is deleted when you exit application. CAUTION: Each session has multiple files associated with it. Do not modify any of the session files and/or folders as this may result in loss of data or corrupted session files. The "My TekExpress" folder mentioned above is created as a shared folder with share name as ’s My TekExpress ================================================================================================= 3. TekExpress Automotive Ethernet application related changes in your system. After first launch of "TekExpress Automotive Ethernet" following changes take place in your Computer. a) "My TekExpress" folder is created under "My Documents" folder of current user NOTE: If a user with new login ID launches "TekExpress Automotive Ethernet", "My TekExpress" folder is created under "My Documents" of the new user. b) "Automotive Ethernet" folder is created under "My TekExpress" folder c) "Untitled Session" folder is created under "Automotive Ethernet" folder, note that every time "TekExpress Automotive Ethernet" is launched "Untitled Session" folder is created under "Automotive Ethernet" folder and will be deleted after proper termination of application. d) If user saves a session in TekExpress Automotive Ethernet all session files are saved under "Automotive Ethernet" folder. Note that each session has multiple files associated with it and do not tamper with any of the session file(s) and/or folder(s) this may result in loss of data or corrupted session files. ================================================================================================= 4. Supported Tests for Automotive Ethernet Physical Layer Specification Tests are available for both Pre-recorded Waveform and live Signal inputs: TekExpress Automotive Ethernet application supports the following transmitter Electrical Specifications Tests for electrical characteristics of Physical Media Attachment (PMA). * 100BASE-T1 (IEEE Std.802.3bw) tests Transmitter Electrical Specifications Tests: * Test 96.5.4.5 - Transmit Clock Frequency * Test 96.5.4.3 - Transmitter Timing Jitter - Master Mode * Test 96.5.4.3 - Transmitter Timing Jitter - Slave Mode * Test 96.5.4.1 - Transmitter Output Droop * Test 96.5.4.4 - Transmitter Power Spectral Density (PSD) * Test 96.5.6 - Transmitter Peak Differential Output * Test 96.5.4.2 - Transmitter Distortion * Test 96.8.2.1 - Return Loss(MDI) *1000BASE-T1 (IEEE Std 802.3bp™-2016) tests Transmitter Electrical Specifications Tests: * Test 97.5.3.6 - Transmit Clock Frequency * Test 97.5.3.3 - Transmitter Timing Jitter - Master Mode * Test 97.5.3.3 - Transmitter Timing Jitter - Slave Mode * Test 97.5.3.3 - Transmitter Timing Jitter - MDI Jitter * Test 97.5.3.1 - Transmitter Output Droop * Test 97.5.3.4 - Transmitter Power Spectral Density (PSD) * Test 97.5.3.5 - Transmitter Peak Differential Output * Test 97.5.3.2 - Transmitter Distortion * Test 97.7.2.1 - Return Loss(MDI) *MultiGBASE-T1 (IEEE Std 802.3ch™-2020) tests Transmitter Electrical Specifications Tests: 149.5.2.1 Maximum output droop 149.5.2.2 Transmitter linearity 149.5.2.3.1 Transmitter timing jitter - Master Jitter 149.5.2.3.1 Transmitter timing jitter - Slave Jitter 149.5.2.3.2 Transmit MDI random jitter in master mode 149.5.2.3.2 Transmit MDI deterministic jitter in master mode 149.5.2.3.2 Transmit MDI Even-Odd jitter in master mode 149.5.2.4 Transmitter Power Spectral Density (PSD) and power level 149.5.2.5 Transmitter peak differential output 149.5.2.6 Transmitter clock frequency 149.8.2.1 MDI return loss ================================================================================================= 5. What's new in this release? - Feb 2021 v10.5.21 * Fix for ART 65373. - Dec 2020 v10.5.0 * MultiGBASE-T1(IEEE Std 802.3ch™-2020) Tx Compliance Solution * Other fixes and Ehancements - Aug 2020 v10.5.0 (Beta) * MultiGBASE-T1 Tx Compliance Solution - Manual settings support (Acquisitions) - July 2020 v10.4.0 * Included support for an user option to enable/disable the bandpass filter used in Jitter measurements in 1000BT1 * 1000BASE-T1:Addresses an issue with return loss measurement and distortion measurement for certain scope models * Other fixes and Enhancements - Dec 2019 v1.3.0 (Beta) * 10BASE-T1S All measurements - Live mode and Multi run support - April 2019 (Version: 10.2.8) * Added Filter information for Jitter measurements in the report * Enable logging option provided in UI (Preferences panel) * Issue with Instruments disconnecting on LAN is fixed * Support for P77STCABL probe tip with TDP77XX probes * Jumper settings based on LANE A,B,C and D are added for Tx Distortion measurement - December 2018 (Version: 10.2.5) * 1000BASE-T1 Tx Distortion and Return Loss measurements support * Multirun support * SCPI support (Programmatic Interface) * 1000BASE-T1 Tx Distortion Soft CDU support * Support to hide schematic popup for single measurement selection * 2MHz pass band filter applied to all jitter measurements * dBm and dBm/Hz unit selection options for PSD measurement - September 2018 (Version: 10.2.4) Code drop * Vertical scale improvements as per customer feedback * Measurement name added in connection schematic pop-up * Added Phase initiate command in AFG3K to get proper Phase * Return Loss Calibration Schematic updated for 1000BASE-T1 * Fix for MSO5 series signal locking issue * Improvements to ReturnLoss calibration on AWG5200 to match with the expected results * Connection diagram updates - July 2018 (Version: 10.2.3) * Support for MSO 6 series scopes (This change does not affect 5K/7K/70K series scopes) - June 2018 (Version: 10.2.2) Code drop * Power Spectral Density: Changed from dBm to dBm/Hz * Tx Distortion and Tx Return Loss Measurements issue addressed for AWG 5200 series * Slave Jitter Signal Validation fix for 100BASE-T1 - June 2018 (Version: 10.2.1) * Fix for Droop measurement execution issue on MSO 5 series Scope - April 2018 * 1000BASE-T1 (Std 802.3bp™-2016)tests for electrical characteristics tests. * Histogram Plot for Transmitter Clock and Transmitter Jitter measurements. * 100BASE-T1 & 1000BASE-T1 Return Loss test using Signal Generator AWG5200. * Vertical clipping issue for input signal range > 3 Voltage is fixed. * New test fixture, which support 100BASE-T1 & 1000BASE-T1 measurements. - Aug 2017 * Added new Transmitter Electrical specifications test called Transmitter Peak Differential Output. * Updated the Transmitter Distortion measurement a) Introduced "Software Signal Correction" method which runs without Hardware Clock Recovery unit. b) Added "None" option at Transmitter Distortion measurement configuration along with 'Hardware Clock Divider' and 'Software Signal Correction'. * Added support to generate result table in .csv format. This option is available under report tab. * Addressed some of the software defects and did improvements to the application. - June 2016 * Built for the new Scope firmware version 10.3.3 and above. * AFG3K setup fully automated for Return Loss measurement. * Added Support for Signal sources AWG5KB/C. * Signal validation for Transmitter Timing Jitter - Slave Mode test is added as a square wave. - April 2016 TekExpress BRR application supports the list of transmitter tests mention in section 4 (above) for electrical characteristics of Physical Media Attachment (PMA) for a BroadR-Reach Ethernet PHY. Tests are available for both Pre-recorded Waveform and live Signal inputs: 1) TekExpress BRR supports for BroadR-Reach Physical Layer Transceiver Specification tests. 2) Performance improvement for all the measurements. 3) New Calibration Tab for Transmitter Distortion and Return Loss(MDI) has been designed and merged with Configuration Window. 4) When TekExp BRR solution launches from 'Analyze' menu, a splash screen pops up as “TekExpress Initializing”. 5) Return Loss Calibration has 'Plot’ feature button. User can click and see the Load, Open and Short calibrated plots. 6) Automatic AWG5kc/7kc and AFG3kc setup for Disturber Source for Transmitter Distortion test. 7) Automatic AWG5kc/7kc and AFG3kc setup for Return Loss(MDI) test. 8) Tx Distortion measurement trigger width lower limit set from 480nsec to 470nsec to enable stable triggering for marginal devices 9) Tx Distortion measurement configuration has option 'Use Clock Divider Unit'. It allows user to set Reference 10 MHz clock as External for selected Signal Source and oscilloscope. 10) Transmitter Output Droop test has been improved with various Droop conditions. 11) Autoset performance on 5K/5KB scopes is improved from 45-50secs to ~9secs. 12) As per BroadR-Reach spec, respective Mask has been added on plots for Transmitter Power Spectral Density (PSD) and Return Loss(MDI) measurements. 13) Application provide an option to generate the report in PDF format. 14) Some of the key defects has been address in this release. 15) Golden reference waveforms are added for all the tests at below location, --> C:\Users\Public\Tektronix\TekApplications\Automotive-Ethernet\ Path of the AWG5k/7k and AWF3k setups are present at below location, --> C:\Program Files\Tektronix\TekExpress\TekExpress Automotive-Ethernet\AWG Waveforms\ ================================================================================================= 6. Supported list of equipment, accessories and software 6.1 Supported Oscilloscopes for: * DPO5104, DPO5204, MSO5104, MSO5204 * DPO5104B, DPO5204B, MSO5104B, MSO5204B * DPO7104C, DPO7254C, DPO7354C * DPO70404C, DPO70604C, DPO70804C, DPO71254C, DPO71604C, DPO72004C * DPO/DSA 70KD series * MSO70404C, MSO70604C, MSO70804C, MSO71254C, MSO71604C, MSO72004C * DPO72504DX, DPO73304DX, DPO72304DX, DPO72504DX, DPO73304DX, MSO72304DX, MSO72504DX, MSO73304DX *** NOTE: The TekExpress Automotive Ethernet application runs on the above Tektronix Oscilloscopes with bandwidths of >= 1 GHz for 100BASE-T1 and bandwidth of >= 2 GHz for 1000BASE-T1. 6.2 Supported AWGs and AFG for Automotive Ethernet : * AWG7102(Option 2): 10 GS/s * AWG7122B/C : 12 GS/s * AWG7082 * AWG7082B/C * AWG70102 * AWG5014: 1.2 GS/s, 14-bit AWG * AWG5014B/C * AWG5012B/C * AWG5002B/C * AWG5200 * AFG31152 (For 1000BASE-T1 and 100BASE-T1) * AFG31252 (For 1000BASE-T1 and 100BASE-T1) * AFG3252: 2 GS/s, 14-bit AFG * AFG3252C * AFG3102: 1 GS/s, 14-bit AFG * AFG3022B/C * AFG3052C * AFG3102C * AFG3152C * AFG3102 *** NOTE: 1) W/O Amplifier, AWG7000 series generates 2-Channels gain of 2 Vp-p. 2) Supported firmware version of AFG is 1.0.7 and above. 6.3 Probes: 100BASE-T1 Probes: * Return Loss Measurement: P6248, P6247, TDP1500 * All Other measurements: P6247, P6248, P6330, TDP1500, TDP3500 1000BASE-T1 Probes: * All measurements: TDP3500 **** NOTE: TCA-VPI50 50 OHM TekVPI to TekConnect Probe Adapter is require for MSO/DPO70K scope. 6.4 Test Fixtures: 100BASE-T1 * TF-XGBT * TF-BRR-CFD 1000BASE-T1 * TF-XGBT * TF-BRR-CFD *** TekScope: WiN7 64-bit Ver: 10.0 & above ================================================================================================= 7. Known Limitations 7.1 TekExpress Automotive Ethernet Application related limitations a) Return Loss and Transmitter Distortion measurements needs Calibration before RUN. Calibration is recommended when there is a change in the setup. b) After the calibration click 'Apply' button for Transmitter Distortion and Return Loss measurements. c) When you recall the Return Loss measurement session file, the Calibration files are not recalled. You need to set/load the Calibration files manually. d) You cannot stop or pause Calibration RUN during its execution. (This is applicable for both Return loss and Transmitter Distortion measurement) e) If Oscilloscope has Older version of solution, the Old session file saved at X:\BRR will not be able to load on this build. The New path for solution is 'X:\Automotive Ethernet'. 7.2 TekExpress Automotive Ethernet Application Known issues a) While printing the MHT report, page layout need to be adjusted to obtain desired level of text and image visibility either by using fit to single page or by printing report on multiple pages or by using large paper size. b) If too many times the TekExpress Automotive Ethernet application is stopped manually in between the Runs, you might observe some delay in test execution, it is recommended to re-launch the TekExpress Automotive Ethernet application. c) De-selecting all measurements action takes long time for 5k series scope. d) Transmitter Distortion test's Configuration Tab is flashing on click. e) While the measurements are run - clicking on the suite/multirun options the application can ocasionally crash ================================================================================================= 8. Installer Related Instructions: a) Installation of TekExpress Automotive Ethernet Application and other software packages are installed on C: drive only. b) The available free space on C: drive must be minimum 2.2GB. c) Need to have sufficient hard disc space (Minimum of 2GB) to save the session information. ================================================================================================= 9. Software Licenses Newtonsoft.Json Copyright (c) 2007 James Newton-King Tektronix has incorporated Newtonsoft.Json into the TekScope applications which is an open source component. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Intel(R) Integrated Performance Primitives (Intel IPP) Tektronix has incorporated Intel(R) Integrated Performance Primitives (Intel IPP)into the TekScope application under the agreement of the end user license. Copyright (c) 2018 Intel Corporation. Use and Redistribution. You may use and redistribute the software (the “Software”), without modification, provided the following conditions are met: * Redistributions must reproduce the above copyright notice and the following terms of use in the Software and in the documentation and/or other materials provided with the distribution. * Neither the name of Intel nor the names of its suppliers may be used to endorse or promote products derived from this Software without specific prior written permission. * No reverse engineering, decompilation, or disassembly of this Software is permitted. Limited patent license. Intel grants you a world-wide, royalty-free, non-exclusive license under patents it now or hereafter owns or controls to make, have made, use, import, offer to sell and sell (“Utilize”) this Software, but solely to the extent that any such patent is necessary to Utilize the Software alone. The patent license shall not apply to any combinations which include this software. No hardware per se is licensed hereunder. Third party and other Intel programs. “Third Party Programs” are the files listed in the “third-party-programs.txt” text file that is included with the Software and may include Intel programs under separate license terms. Third Party Programs, even if included with the distribution of the Materials, are governed by separate license terms and those license terms solely govern your use of those programs. DISCLAIMER. THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT ARE DISCLAIMED. THIS SOFTWARE IS NOT INTENDED FOR USE IN SYSTEMS OR APPLICATIONS WHERE FAILURE OF THE SOFTWARE MAY CAUSE PERSONAL INJURY OR DEATH AND YOU AGREE THAT YOU ARE FULLY RESPONSIBLE FOR ANY CLAIMS, COSTS, DAMAGES, EXPENSES, AND ATTORNEYS’ FEES ARISING OUT OF ANY SUCH USE, EVEN IF ANY CLAIM ALLEGES THAT INTEL WAS NEGLIGENT REGARDING THE DESIGN OR MANUFACTURE OF THE MATERIALS. LIMITATION OF LIABILITY. IN NO EVENT WILL INTEL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. YOU AGREE TO INDEMNIFY AND HOLD INTEL HARMLESS AGAINST ANY CLAIMS AND EXPENSES RESULTING FROM YOUR USE OR UNAUTHORIZED USE OF THE SOFTWARE . No support. Intel may make changes to the Software, at any time without notice, and is not obligated to support, update or provide training for the Software. Termination. Intel may terminate your right to use the Software in the event of your breach of this Agreement and you fail to cure the breach within a reasonable period of time. Feedback. Should you provide Intel with comments, modifications, corrections, enhancements or other input (“Feedback”) related to the Software Intel will be free to use, disclose, reproduce, license or otherwise distribute or exploit the Feedback in its sole discretion without any obligations or restrictions of any kind, including without limitation, intellectual property rights or licensing obligations. Compliance with laws. You agree to comply with all relevant laws and regulations governing your use, transfer, import or export (or prohibition thereof) of the Software. Governing law. All disputes will be governed by the laws of the United States of America and the State of Delaware without reference to conflict of law principles and subject to the exclusive jurisdiction of the state or federal courts sitting in the State of Delaware, and each party agrees that it submits to the personal jurisdiction and venue of those courts and waives any objections. The United Nations Convention on Contracts for the International Sale of Goods (1980) is specifically excluded and will not apply to the Software. *Other names and brands may be claimed as the property of others. WKTOpdf Copyright (C) 2010 wkhtmltopdf/wkhtmltoimage Authors. wkhtmltopdf 0.12.1.2 will be installed along with TekScope applications. It is an open source (LGPLv3) command line tools to render HTML into PDF using the QT Webkit rendering engine. This program is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation GNU LESSER GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. This version of the GNU Lesser General Public License incorporates the terms and conditions of version 3 of the GNU General Public License, supplemented by the additional permissions listed below. 0. Additional Definitions. As used herein, "this License" refers to version 3 of the GNU Lesser General Public License, and the "GNU GPL" refers to version 3 of the GNU General Public License. "The Library" refers to a covered work governed by this License, other than an Application or a Combined Work as defined below. An "Application" is any work that makes use of an interface provided by the Library, but which is not otherwise based on the Library. Defining a subclass of a class defined by the Library is deemed a mode of using an interface provided by the Library. A "Combined Work" is a work produced by combining or linking an Application with the Library. The particular version of the Library with which the Combined Work was made is also called the "Linked Version". The "Minimal Corresponding Source" for a Combined Work means the Corresponding Source for the Combined Work, excluding any source code for portions of the Combined Work that, considered in isolation, are based on the Application, and not on the Linked Version. The "Corresponding Application Code" for a Combined Work means the object code and/or source code for the Application, including any data and utility programs needed for reproducing the Combined Work from the Application, but excluding the System Libraries of the Combined Work. 1. Exception to Section 3 of the GNU GPL. You may convey a covered work under sections 3 and 4 of this License without being bound by section 3 of the GNU GPL. 2. Conveying Modified Versions. If you modify a copy of the Library, and, in your modifications, a facility refers to a function or data to be supplied by an Application that uses the facility (other than as an argument passed when the facility is invoked), then you may convey a copy of the modified version: a) under this License, provided that you make a good faith effort to ensure that, in the event an Application does not supply the function or data, the facility still operates, and performs whatever part of its purpose remains meaningful, or b) under the GNU GPL, with none of the additional permissions of this License applicable to that copy. 3. Object Code Incorporating Material from Library Header Files. The object code form of an Application may incorporate material from a header file that is part of the Library. You may convey such object code under terms of your choice, provided that, if the incorporated material is not limited to numerical parameters, data structure layouts and accessors, or small macros, inline functions and templates (ten or fewer lines in length), you do both of the following: a) Give prominent notice with each copy of the object code that the Library is used in it and that the Library and its use are covered by this License. b) Accompany the object code with a copy of the GNU GPL and this license document. 4. Combined Works. You may convey a Combined Work under terms of your choice that, taken together, effectively do not restrict modification of the portions of the Library contained in the Combined Work and reverse engineering for debugging such modifications, if you also do each of the following: a) Give prominent notice with each copy of the Combined Work that the Library is used in it and that the Library and its use are covered by this License. b) Accompany the Combined Work with a copy of the GNU GPL and this license document. c) For a Combined Work that displays copyright notices during execution, include the copyright notice for the Library among these notices, as well as a reference directing the user to the copies of the GNU GPL and this license document. d) Do one of the following: 0) Convey the Minimal Corresponding Source under the terms of this License, and the Corresponding Application Code in a form suitable for, and under terms that permit, the user to recombine or relink the Application with a modified version of the Linked Version to produce a modified Combined Work, in the manner specified by section 6 of the GNU GPL for conveying Corresponding Source. 1) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (a) uses at run time a copy of the Library already present on the user's computer system, and (b) will operate properly with a modified version of the Library that is interface-compatible with the Linked Version. e) Provide Installation Information, but only if you would otherwise be required to provide such information under section 6 of the GNU GPL, and only to the extent that such information is necessary to install and execute a modified version of the Combined Work produced by recombining or relinking the Application with a modified version of the Linked Version. (If you use option 4d0, the Installation Information must accompany the Minimal Corresponding Source and Corresponding Application Code. If you use option 4d1, you must provide the Installation Information in the manner specified by section 6 of the GNU GPL for conveying Corresponding Source.) 5. Combined Libraries. You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities that are not Applications and are not covered by this License, and convey such a combined library under terms of your choice, if you do both of the following: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities, conveyed under the terms of this License. b) Give prominent notice with the combined library that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 6. Revised Versions of the GNU Lesser General Public License. The Free Software Foundation may publish revised and/or new versions of the GNU Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library as you received it specifies that a certain numbered version of the GNU Lesser General Public License "or any later version" applies to it, you have the option of following the terms and conditions either of that published version or of any later version published by the Free Software Foundation. If the Library as you received it does not specify a version number of the GNU Lesser General Public License, you may choose any version of the GNU Lesser General Public License ever published by the Free Software Foundation. If the Library as you received it specifies that a proxy can decide whether future versions of the GNU Lesser General Public License shall apply, that proxy's public statement of acceptance of any version is permanent authorization for you to choose that version for the Library. For programs licensed under the GNU General Public License (GPL) or Lesser GNU General Public License (LGPL)the complete corresponding sources are available. You can order a CD containing the sources from us for a period of three years after download of the software, by sending a written request to: Chief Intellectual Property Counsel, Tektronix, Inc. MS 50/LAW 14150 SW Karl Braun Dr. Beaverton OR, 97077 This offer is valid to anyone in receipt of this information. Your request should include: (i) the name of the product, (ii) your (company) name, and (iii) your return mailing and email address (if available). Please note that we may charge you a fee to cover the cost of performing this distribution. ================================================================================================= 10. Contacting Tektronix MyTek - One way to receive timely information on new software updates, new products from Tektronix and other useful information is to join the Tektronix community. Visit www.tek.com/userto become a member. Product Support - For application-oriented questions about a Tektronix measurement product, in North America call 1-800-833-9200 option 3, Monday-Friday, 6:00AM - 5:00PM Pacific Time or contact us by email at techsupport@tektronix.com. For service support call 1-800-833-9200 option 2, Monday-Friday, 5:00AM-5:00PM Pacific Time or contact us by email at meas-svc-feedback@tektronix.com Outside of North America: please contact your local Tektronix Sales or Distributor office. Refer to our web site at www.tektronix.com for listings of those offices. For all other information call 1-800-833-9200, visit our web site at www.tektronix.com, or write to us at: Tektronix, Inc. P.O. Box 500 Beaverton, OR 97077